ZR-YJV22 Flame Retardant Wire Armored XLPE Cable 0.6/1kV For Safer LV Feeders

The ZR-YJV22 is a 0.6/1kV low-voltage copper core, XLPE insulated, PVC sheathed, and steel tape armored power cable with flame-retardant properties. It is designed for locations requiring reduced flame spread and mechanical protection, and is suitable for installation in cable trays, shafts, corridors, conduits, and protective trenches.

When your project demands enhanced line protection and flame retardancy, the ZR-YJV22 is a mainstream low-voltage solution that meets both needs. The XLPE insulation ensures stable electrical performance, the steel tape armor enhances the cable's durability in harsh conditions, and the flame-retardant design helps reduce flame spread along the cable route within buildings and industrial facilities.

ZR-YJV22 cable combines two purchasing drivers:

• ZR: Flame retardant requirements (grade/category defined by applicable standards and your bill of quantities)
• YJV22: Copper core, cross-linked polyethylene insulation, PVC sheath, steel tape armored (STA) low-voltage power cable

It is typically used in fixed-installation low-voltage distribution systems, especially suitable for cable concentrations in cable trays, risers, and service passages, or where cable paths are subject to high mechanical stress (e.g., ducts, protective trenches, construction areas).

Typical rated voltage:

0.6/1 kV

Typical applications:

Low-voltage feeders, sub-feeders, and distribution lines

Installation method:

Fixed installation

• Commercial towers, residential communities, shopping malls, hospitals, schools, public places
• Cable tray and trunking systems (dense cable arrangements)
• Service shafts, risers, basements, and utility corridors
• Machine rooms, distribution rooms, and distribution corridors in industrial facilities
• Protective trench and conduit installations (armor reduces the risk of damage)

• If the project requires low-smoke halogen-free cables, specify low-smoke halogen-free flame-retardant armored cables instead of PVC-sheathed cables.
• If the circuit must remain operational in a direct fire source environment (emergency circuit integrity), specify a fire-resistant cable design.
• If direct burial is required, confirm the installation method, protective layer, and relevant standards before final selection.

Conductor:

Copper stranded wire

Insulation:

Cross-linked polyethylene (XLPE)

Inner Layer:

Padding or inner sheath for supporting the armor interface (depending on the structure)

Armor Layer:

Steel tape (STA)

Outer Sheath:

PVC (flame retardant compound, as required)

Cable Type:

Flame-retardant armored low-voltage power cable for fixed installation

The stranding method is controlled to meet resistance targets and installation operation requirements.

The insulation layer is manufactured using extrusion and cross-linking processes to ensure stable electrical performance.

The core wires are stranded to maintain a consistent cable geometry for easy pulling and cable tray cabling.

A protective inner layer is first applied, followed by the wrapping of a steel tape armor layer, with controlled overlap to provide protection.

The selection of sheath compounds and extrusion control are strictly managed to meet flame-retardant requirements.

Typical checks include conductor resistance, insulation/sheath thickness, standard-compliant electrical testing, dimensional checks, and necessary flame-retardant validation.

1. Copper Conductor Stranding
2. XLPE Insulation Structure
3. Core Assembly
4. Gasketing and Armoring Applications
5. Flame-Retardant Sheath Extrusion
6. Routine Validation

Model:

ZR-YJV22

Rated Voltage:

0.6/1 kV

Cable Type:

Flame-retardant copper conductor, XLPE insulation, PVC sheath, steel tape armored low-voltage power cable

Conductor:

Copper, stranded

Insulation:

XLPE

Armor:

Steel tape (STA)

Outer Sheath:

PVC (flame retardant added according to required rating)

Core Options:

1 core/2 cores/3 cores/4 cores/5 cores

Typical Size Range:

1.5 to 300 mm² (depending on core count and applicable standards)

Typical Applications:

Low-voltage feeders and distribution, suitable for cable trays, shafts, corridors, conduits, and protective trenches

Installation Method:

Fixed installation

Packaging:

Export reel packaging is recommended for feeder sizes; smaller reels are available upon agreement.

Options:

Sheath color, marking language, core identification method, reel length planning, packaging marking, documentation package, inspection support

1. Confirm the flame retardancy requirement (ZR) and its grade/category in your Bill of Materials (BOQ).
2. Confirm the cabling path type and risks (tray, riser, corridor, conduit, protective trench) and cable grouping density.
3. Select the core count based on system design (neutral and PE requirements).
4. Select the cross-sectional area based on load current, cabling path length, allowable voltage drop, grouping, environmental/soil conditions, and installation method.
5. Plan the reel length to reduce the number of joints on long paths and improve acceptance efficiency.
6. Confirm Documents Required for Inspection, Import, and Handover

Product:

ZR-YJV22

Voltage:

0.6/1 kV

Standards/Requirements:

__

Flame Retardant Rating/Category Requirements:

__

Number of Cores:

__

Cross-section and Quantity:

__

Total Length (meters):

__

Wiring Type:

Tray/Riser/Corridor/Drain/Protective Trench

Destination:

Country and Port __

Trade Terms:

__

Packaging:

Reel/Coil

Preferred Reel Length:

__

Required Documents:

__

Special Requirements:

Marking Language/Sheath Color/Inspection/Delivery Schedule

• Over Productions Service:

  JinHong has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.

• Quality Certification Services:

  JinHong cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.

• Profession Customer Service:

  JinHong provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.

• Delivery And Shipping Services:

  While we at JinHong provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.

JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.