YJLV22 Armored Aluminum XLPE Cable 0.6/1kV XLPE Electrical Cable

The YJLV22 is a 0.6/1kV steel-tape armored aluminum core power cable with XLPE insulation, suitable for fixed installations. Designed for conduits and protective trenches, it enhances mechanical protection and reduces engineering costs for long-distance low-voltage feeder lines.

Deliver more low-voltage power in more demanding lines using a lighter, more economical cable. The YJLV22 features XLPE insulation for stable low-voltage performance and V22 steel-tape armor for effective protection in underground and conduit installations, especially suitable for applications with compressive and construction stress risks.

YJLV22 is an armored low-voltage power cable, typically comprising:

• Aluminum core (stranded)
• XLPE insulation
• Armored support pad (depending on standard)
• Steel tape armor (V22)
• Protective outer sheath (typically PVC, depending on standard)

Suitable for stationary installations requiring mechanical protection where the aluminum core helps control overall project costs.

Typical rated voltage: 0.6/1 kV

Common applications: Low-voltage feeders, sub-feeders, and distribution circuits in stationary installations

Ensure its construction and testing are fully compliant with your project standards and Bill of Quantities (BOQ).

• Underground pipe and conduit crossings
• Protective trench lines in industrial and commercial parks
• Building perimeter feeders and indoor-outdoor transitions
• Basement service corridors and utility access routes
• Long-distance feeder lines, reducing cable weight and improving traction efficiency

• Inside pipes and conduits
• In protective trenches with appropriate backfilling and warning protection
• Fixed lines requiring mechanical protection
• Not suitable for continuous dragging, winding operations, or repeated high-frequency movement

Aluminum conductors reduce material costs and transport weight, helping to control total project expenditure for long-distance lines.

Armoring improves compressive strength and resistance to external mechanical stress, enhancing cable durability in underground and built environments.

XLPE insulation provides reliable dielectric properties for continuous low-voltage power distribution.

The lighter overall weight facilitates faster cable pulling and handling in long-distance conduit cabling, improving field efficiency.

Aluminum typically requires a larger cross-section than copper to meet the same voltage drop and current carrying capacity targets. Size selection should be calculated based on load, distance, grouping, environmental/soil conditions, and permissible voltage drop.

Use aluminum terminal blocks (or bimetallic terminal blocks if necessary), the correct crimping tools, control torque, and apply antioxidants according to your installation procedure. Termination methods have a significant impact on long-term stability.

Underground cabling benefits from pre-planned reel lengths and joint locations, reducing splicing risks and speeding up commissioning.

1. Conductor Preparation

   Aluminum conductors are stranded to balance conductivity, flexibility, and ease of operation for feeder installation.

2. Cross-linked Polyethylene (XLPE) Insulation Molding

   The insulation layer is extruded and cross-linked to form a stable dielectric layer suitable for low-voltage applications.

3. Core Assembly

   Cores are stacked in a controlled geometry to improve roundness and tensile strength.

4. Padding and Armor Structure

   The padding layer is applied first, followed by the winding of a steel tape armor layer, providing mechanical protection through controlled overlap.

5. Sheath and Marking

   An outer sheath is extruded to protect the armor layer and provide abrasion resistance, followed by identification marking for traceability.

6. Routine Verification

   Typical checks include conductor resistance, insulation thickness control, spark/voltage testing, dimensional inspection, and armor/sheath integrity checks (performed according to standards).

1 core, 2 cores, 3 cores, 4 cores, 5 cores (depending on the project; 4 cores are commonly used for three-phase feeders with a neutral line)

16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500

JinHong has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.

JinHong cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.

JinHong provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.

While we at JinHong provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.

JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.