Aluminum Alloy XLPE Power Cable Low Voltage Cable YJHLV 0.6/1kV For LV Feeds

YJHLV is a low-voltage power cable (typically 0.6/1kV) with AA-8000 aluminum alloy conductors, XLPE insulation, and a PVC sheath, suitable for fixed installations. For building feeders and urban power distribution where weight, cost, and installation efficiency are important, YJHLV is an ideal alternative to copper cables.

YJHLV enables the construction of reliable low-voltage power distribution systems with lighter weight and better engineering economics. It utilizes modern aluminum alloy materials, XLPE insulation ensures stable low-voltage operation, and a durable sheath suitable for everyday installations.

YJHLV is a low-voltage power cable typically using AA-8000 series aluminum alloy stranded conductors, XLPE insulation, and a PVC outer sheath. Because aluminum alloy offers superior mechanical properties compared to traditional pure aluminum conductors, while being lighter and less expensive than copper, it has been specified as an alternative to copper cables for feeder cables in many building and utility projects.

Note: Voltage ratings, construction, and acceptance testing must always be consistent with project standards and the Bill of Quantities (BOQ).

• Building main feeders and riser distribution (weight reduction aids installation)
• Commercial complexes, residential buildings, warehouses, and industrial parks
• Urban low-voltage power grid distribution and campus power networks
• Cable trays, conduits, cable trays, and protected outdoor lines
• Retrofit projects, replacing old feeders with copper feeders to control budgets without sacrificing line reliability

Fixed installation lines with standard mechanical protection

If underground mechanical risks are high or direct burial is required, specify the appropriate armor or line rating according to project standards.

• Lighter Weight, Easier to Handle

  Compared to copper conductors, aluminum alloy conductors reduce the overall weight of the cable, thereby improving traction efficiency, tray loading rate, and labor productivity for long-distance cabling.

• Balanced Economic Benefits for Large Bills of Quantities

  YJHLV is widely used to reduce material costs while maintaining stable low-voltage feeder performance when properly designed.

• Mechanical Properties of Modern Alloys

  Compared to traditional aluminum conductors, AA-8000 alloy conductors typically offer higher creep resistance and connection stability, achieving superior long-term termination performance when using the correct accessories.

• XLPE Insulation Ensures Reliable Low-Voltage Operation

  XLPE insulation ensures stable electrical performance and thermal stability for continuous feeder operation.

• Size Selection Principles

  Because aluminum alloy has a higher resistivity than copper, its cross-sectional dimensions should generally be larger than those of copper tubing of equivalent size to meet current carrying capacity and voltage drop requirements.

• Termination and Accessories

  Use certified aluminum alloy terminals, and bimetallic terminals when necessary. Use the correct crimping dies, control torque, and apply antioxidants according to installation specifications. Proper termination is crucial for ensuring long-term stability.

• Connection Planning

  For long feeders, determine the coil length and connector locations as early as possible to reduce the number of on-site connectors and expedite commissioning.

• Conductor: AA-8000 aluminum alloy, stranded
• Insulation: Cross-linked polyethylene (XLPE)
• Outer Sheath: Polyvinyl chloride (PVC) (common)
• Armor: None (unless otherwise specified as armored)
• Installation Method: Fixed installation in cable trays, conduits, cable trays, shafts, and protective wiring.

• Alloy Rod Processing and Stranding

  The stranding of the alloy conductor is strictly controlled to achieve good flexibility, mechanical strength, and stable resistance.

• Cross-linked Polyethylene (XLPE) Insulation Extrusion and Cross-linking

  The insulation layer is extruded and cross-linked to form a robust dielectric layer suitable for low-voltage distribution applications.

• Core Wire Assembly and Geometry Control

  The core wires are arranged in a specific manner to maintain stable cable roundness, thereby improving pulling performance in conduits and ducts.

• Sheath and Marking

  The outer sheath provides protection and abrasion resistance in typical installation environments and is clearly marked for traceability.

• Routine Quality Inspections

  Typical inspections include conductor resistance, insulation thickness, voltage/spark testing, dimensional inspection, and sheath integrity.

1. Confirm system voltage rating (usually... 0.6/1kV) and related standards
2. Select the number of core wires based on system design and neutral/protective conductor requirements.
3. Select conductor size based on current carrying capacity, distance, voltage drop, grouping method, and environmental/duct conditions.
4. Confirm the line type and mechanical risks; select armored construction if required.
5. Determine termination methods and accessories (terminals, torque values, anti-oxidation measures) as early as possible.
6. Determine reel length and connector scheme to reduce on-site splicing.

• Over Productions Service:

  JinHong has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.

• Quality Certification Services:

  JinHong cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.

• Profession Customer Service:

  JinHong provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.

• Delivery And Shipping Services:

  While we at JinHong provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.

• Packaging of JinHong:

  JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.