WDZ-YJY23 0.6/1kV Low Voltage Wire LSZH Armored XLPE Cable

WDZ-YJY23 is a low-smoke halogen-free (LSZH) XLPE insulated copper core power cable with steel tape armor, suitable for 0.6/1kV low-voltage distribution. It is specifically designed for locations requiring low-smoke halogen-free performance and mechanical protection, such as conduits, trenches, and utility corridors.

WDZ-YJY23 is designed to handle more complex wiring and safer indoor-outdoor transitions. Its low-smoke halogen-free performance and steel tape armor protection help contractors reduce wiring risks, minimize maintenance incidents, and meet compliance requirements.

WDZ-YJY23 is a low-voltage armored power cable typically featuring stranded copper conductors and XLPE insulation, protected by an inner insulation layer, a steel tape armor layer, and a low-smoke halogen-free outer sheath system. The LSZH sheath is suitable for projects requiring reduced smoke and halogen-free emissions in the event of a fire, helping to improve evacuation visibility and reduce the impact of corrosive gases. The steel-tape armor enhances the cable's resistance to compression and external mechanical stress, making it ideal for underground conduits, protected trenches, basement utility corridors, and sections subjected to construction loads.

• Underground cable trenches and perimeter power distribution around buildings
• Basement and utility corridor feeders with potential mechanical stress
• Low-voltage power distribution in industrial and commercial parks
• Indoor-outdoor transitions via bushings and conduits
• Infrastructure corridors specifying Low Smoke Halogen-Free (LSZH) performance in enclosed spaces
• Long feeder lines where armoring reduces the risk of line damage

If the line is entirely indoors and on protected cable trays with low mechanical risk, unarmored LSZH cross-linked polyethylene (XLPE) cables may suffice.

If direct burial without cable tray protection is required, confirm project standards and develop a construction plan accordingly.

• Conductor: Copper stranded wire
• Insulation: Cross-linked polyethylene (XLPE)
• Backing: Inner protective layer at the armor interface (depending on standard)
• Armor: Steel tape armor (Type 23)
• Outer Sheath: Low smoke halogen-free (LSZH)
• Installation: Fixed installation in conduits, trenches, corridors, and protected circuits

• 1C: For dedicated feeder circuits (armored single core when specified)
• 2C: For single-phase distribution (Depending on Design)
• 3C: For three-phase circuits without a neutral conductor (Depending on Design)
• 4C: For three-phase circuits with a neutral conductor (Common)
• 5C: For three-phase circuits with a neutral conductor and protective electrical wiring (Depending on Design)

1. Confirm line type and mechanical risk level (conduit, trench, corridor)
2. Confirm Low Smoke Halogen-Free (LSZH) requirements and acceptance criteria in the project standard
3. Confirm armor requirements (Type 23 steel tape) and any other line tests
4. Select core count based on system design and neutral/PE scheme
5. Select cross-sectional area based on current, distance, grouping, soil or conduit thermal conditions, and voltage drop limitations
6. Determine preferred reel length to reduce joints and speed up installation

JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.