600V To 35kV Armoured Electrical Cable 0.6 1kV XLPE Copper Cable YJV22
Product Summary
Product Details
0.6 1kV XLPE Copper Cable
,XLPE Copper Cable YJV22
,35kV Armoured Electrical Cable
Product Description
YJV22 XLPE Copper PVC STA Armored Cable 0.6/1kV for Underground Feeders
YJV22 is a low-voltage copper core power cable designed for fixed installations requiring enhanced mechanical protection. It typically features XLPE insulated copper conductors, a steel tape armor (STA) layer for enhanced compressive strength, and a PVC outer sheath for durability in the construction site. This cable construction is widely used in underground conduits, protected trenches, cable corridors, and building access, particularly suitable for applications where path stress, backfill stress, or handling risks are higher than standard indoor cable trays.
For cross-border sourcing, YJV22 is a reliable low-voltage armored feeder cable suitable for infrastructure, commercial building, and industrial power distribution projects, especially ideal for projects requiring both XLPE performance and steel tape protection within a familiar PVC sheath construction.
- Typical Rated Voltage
- 0.6/1 kV
- Applications
- Low-voltage feeders and distribution lines (fixed installation)
Please confirm the reference standards and acceptance testing requirements listed in your Bill of Materials (BOQ).
- 1C: High-current feeder with phase separation
- 2C: Dedicated single-phase circuit and auxiliary feeder
- 3C: Three-phase circuit without neutral (Depending on Design)
- 4C: Three-phase power distribution with neutral (Common)
- 5C: Three-phase with neutral and PE (Depending on Design)
- 3+1 and 3+2: Common feeder layouts in bills of materials
- 4C x 10
- 4C x 16
- 4C x 25
- 4C x 35
- 4C x 50
- 5C x 10
- 5C x 16
- 5C x 25
- 5C x 35
- 3C x 10
- 3C x 16
- 3C x 25
- 1C x 95
- 1C x 120
- 1C x 150
- 1C x 185
- 1C x 240
Each project is designed with 3+1 and 3+2 configurations.
Supply availability depends on conductor grade, armor construction, and sheath formulation to ensure compliance with standards.
- Underground conduit and cable trench distribution
- Protective trench wiring in industrial and commercial sites
- Incoming lines to main low-voltage switchboards in buildings
- Utility corridors and cable channels with compression risks
- Industrial plants, substations, and park distribution networks
- Fixed installations requiring armor protection
Steel tape armor improves resistance to external pressure and compression, thereby enhancing the reliability of underground conduits and protective trenches.
XLPE insulation material offers reliable dielectric strength and thermal properties, suitable for continuous load feeders.
The PVC outer sheath is abrasion-resistant and easy to handle, making procurement more economical for large projects.
Commonly used in applications where line conditions are more demanding than indoor trays, but special low-smoke halogen-free or fire-resistant specifications are not required.
Common size range, standardized construction, and export drum supply support bill of materials matching and phased delivery.
Copper stranded wire
Cross-linked polyethylene (XLPE)
Protective pad layer beneath the armor layer
Steel tape armor (STA), often associated with a "22" structure in many naming systems
Polyvinyl chloride (PVC)
Fixed installations, underground and protective wiring
- Copper Conductor Preparation
Copper wire is drawn and stranded to meet resistance targets and facilitate installation bending.
- XLPE Insulation Extrusion and Cross-linking
The insulation layer is extruded and cross-linked to form a robust dielectric layer suitable for low-voltage distribution.
- Core Assembly and Geometry Control
The core wires are identified and arranged in a geometry-controlled manner to maintain roundness and improve tensile properties.
- Side Pad Formation
A side pad is laid to protect the core wire bundle and provide a stable base for the placement of the armor layer.
- Steel Tape Armor
The steel tape is wound in a controlled overlapping manner to provide mechanical reinforcement, primarily resisting compression and external pressure.
- PVC Sheath Extrusion and Marking
PVC sheaths are extruded to protect the inner layers, followed by marking for traceability and project control.
- Routine Quality Inspections
Typical inspections include conductor resistance, insulation thickness verification, spark testing, voltage testing, dimensional inspection, and sheath integrity checks.
- Model
- YJV22
- Cable Category
- Copper Core XLPE Insulated PVC Sheathed Steel Tape Armored Low-Voltage Power Cable
- Rated Voltage
- 0.6/1 kV
- Conductor
- Copper, Stranded
- Insulation
- XLPE
- Armor
- Steel Tape (STA)
- Outer Sheath
- PVC
- Core Configuration
- 1 core, 2 cores, 3 cores, 4 cores, 5 cores, 3+1, 3+2
- Common Cross-sectional Area
- 1.5 to 400 mm²
- Typical Operating Temperature
- Up to 90℃ (XLPE design, depending on standard)
- Installation Methods
- Cable trench, conduit, protective trench, corridor, fixed underground wiring
- Packaging
- Most specifications are packaged in reels; export packaging is available.
- Optional Configurations
- Custom marking, reel length planning, documentation kit
- Select YJV22 when the wiring requires armored protection and a standard PVC sheath for underground or protective distribution. Acceptable.
- Select core configuration based on neutral and protective circuit design. Select the cross-sectional area based on load current, line length, grouping method, ambient temperature, and allowable voltage drop.
- If the line requires flame retardancy, low smoke halogen-free, or fire-resistant properties, specify the required category to match the correct model.
- Product
- YJV22
- Voltage
- 0.6/1 kV
- Core Wire Configuration
- __
- Cross-section and Quantity
- __
- Total Length
- __ meters
- Installation Path
- Conduit/Pipe/Trench/Corridor/Inlet Line
- Required Standards
- __
- Destination
- Country and Port __
- Trade Terms
- __
- Preferred Reel Length
- __
- Required Documents
- __
- Remarks
- Markup Language, Packaging Markings, Delivery Schedule
It is used for low-voltage power distribution in underground conduits and for protecting lines where steel tape armor is required to enhance pressure resistance and protect the line.
In many naming systems, it indicates a steel tape armored structure. Please always follow the definitions in the reference standard.
It is typically used for conduits and protective trenches. Direct burial suitability depends on soil conditions, mechanical risks, and local regulations. Please provide detailed route information for proper selection.
YJV22 is armored with steel tape for mechanical protection, while YJV is typically unarmored.
4-core and 5-core cables of 10 to 50 mm² are commonly used for building distribution. Single-core cables of 95 to 240 mm² are commonly used for high-current feeders, depending on the load and distance.
Core configuration, cross-sectional area, total length (meters), required standard, installation route, destination, packaging preferences, and documentation requirements.
JinHong has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.
JinHong cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.
JinHong provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.
While we at JinHong provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.
JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.
