YJLV22 Aluminum XLPE PVC STA Cable 0.6/1kV Armoured Power Cable For Long LV

YJLV22 is a low-voltage aluminum core power cable designed for fixed installation applications, particularly suitable for situations where line protection and cost-effectiveness are both important. It uses stranded aluminum conductors, effectively reducing material costs for large cross-sectional areas and long distances; cross-linked polyethylene (XLPE) insulation ensures stable low-voltage performance; and a steel tape armor layer enhances its resistance to compression and external stress in underground and protected lines. A PVC outer sheath provides durability on the construction site, facilitating pulling, laying, and daily handling. YJLV22 is commonly used for building incoming lines, campus power distribution, industrial park utilities, and underground conduit or trench networks.

Rated Voltage: Typical Rated Voltage: 0.6/1 kV

Applications: Fixed low-voltage feeder and distribution lines

Bidding Instructions: Please confirm the reference standards, conductor grades, and acceptance testing requirements listed in your Bill of Quantities (BOQ).

• Underground conduits and cable trenches in large sites
• Protective trench power distribution in factories and industrial parks
• Incoming lines from transformer areas to low-voltage switchboards
• Utility corridors and cable tunnels with external pressure risks
• Residential and commercial development power distribution networks
• Long-distance low-voltage lines where the economics of aluminum conductors are critical

• Conduit systems, cable trenches, protective trenches, cable corridors, fixed underground lines

Not suitable for dragged, loaded, or frequently moved lines

• 1C: High-current feeder with phase separation
• 2C: Single-phase distribution line
• 3C: Three-phase circuit without neutral (depending on design)
• 4C: Three-phase with neutral (common)
• 5C: Three-phase with neutral and protective cable (depending on design)
• 3+1 and 3+2: Common feeder layouts Bill of Quantities (BOQ)

16 25 35 50 70 95 120 150 185 240 300 400

• 4-core x 25 4-core x 35 4-core x 50 4-core x 70 4-core x 95
• 5-core x 25 5-core x 35 5-core x 50
• 3-core x 35 3-core x 50 3-core x 70
• 1-core x 150 1-core x 185 1-core x 240

3+1 and 3+2 configurations are available according to project design specifications.

Supply availability depends on conductor grade, armor structure, and sheath formulation; specific requirements are subject to standards.

• Typical inspections include conductor resistance, insulation thickness verification, spark testing, voltage testing, dimensional inspection, and sheath integrity.

1. When your project requires aluminum core armored low-voltage cables for underground or protective wiring, choose YJLV22. Cost optimization is possible.
2. Determine the aluminum conductor size based on load current, line length, installation grouping, ambient temperature, and allowable voltage drop.
3. Confirm that the connectors and termination methods are suitable for the aluminum conductors to ensure long-term joint stability.
4. Specify your line type and preferred reel length to reduce the number of joints and speed up installation.

JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.