YJHLV Aluminum Alloy Cable For Building Power And Main Feeders

YJHLV is an aluminum alloy conductor power cable designed for building distribution and main feeder applications, meeting customer demands for lightweight construction, high mechanical performance, and stable conductivity across large cross-sectional areas. In many projects, especially in long-distance laying, overhead trunk lines, and large-volume installations where weight, handling, and total installation costs are critical, YJHLV is widely considered an alternative to traditional aluminum conductor cables.

YJHLV is frequently chosen by EPC contractors, MEP teams, and suppliers for large building projects because of its efficient laying capabilities, reduced load on cable trays and supports, and cost-competitive pricing in the medium to large cross-sectional area range, making it suitable for bulk purchases.

Common voltage ratings vary depending on standards and project requirements. Typical low-voltage building distribution configurations have a rated voltage of 0.6/1kV.

For projects with different voltage requirements, please confirm that the rated voltage and insulation structure comply with tender requirements and local regulations.

• Single Core: For large feeders and phase separation
• Three Core: For compact three-phase lines
• Four Core: For three-phase lines with neutral conductor
• Five Core: For three-phase lines with neutral conductor and phase isolation (PE) (depending on the project)

• 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm², 185 mm², 240 mm², 300 mm², 400 mm², 500 mm², 630 mm²

• 1C x 240, 1C x 300, 1C x 400, 1C x 500
• 3C x 95, 3C x 120, 3C x 150, 3C x 185
• 4 Core x 70, 4 Core x 95, 4-core x 120, 4-core x 150
• 5-core x 50, 5-core x 70, 5-core x 95, 5-core x 120

Availability depends on factory design and standards; please confirm the specific structure for your project.

• Main feeders for commercial and residential buildings
• Upstream trunk lines and shafts
• Power distribution for large public facilities
• Power distribution networks for industrial parks and campuses
• Long-distance cable trays, trunking, and conduits for fixed installations

• Conductor: Aluminum alloy
• Insulation: Cross-linked polyethylene (XLPE) (common for low-voltage distribution)
• Outer sheath: Polyvinyl chloride (PVC) or other sheath specified for the project
• Cable Type: Fixed installation power cable

Note: Specific sheath and fire resistance options depend on project requirements

• If you require lightweight feeder cables for long-distance laying, overhead trunk lines, or large cross-sectional area building power distribution, and have high requirements for handling and structural load-bearing capacity, please select YJHLV.
• Select the core configuration according to network design and neutral/protective layer (PE) requirements.
• Confirm the termination and connector requirements for the aluminum alloy conductors to ensure long-term stable connections.
• If your project requires Low Smoke Halogen-Free (LSZH), flame-retardant, or armored protection, please select the appropriate model based on the installation environment.

• Product: YJHLV
• Rated Voltage: 0.6/1kV
• Core Configuration: 1 core/3 cores/4 cores/5 cores
• Cross-sectional Area: __ mm²
• Structure: __ cores x __ mm²
• Quantity: __ meters
• Installation Method: Tray/Conduit/Shaft/Main Pipe
• Required Standard: __
• Destination: Country and Port
• Trade Terms: FOB/CIF/Other
• Special Requirements: Sheath Type, Fire Resistance, Reel Length, Inspection Documents

JinHong cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.